Ga direct naar de productinformatie
Elektron Trinity Bundle: Digitakt II + Digitone II + Syntakt + Outbox 8 + Overhub
  • Elektron Trinity Bundle: Digitakt II + Digitone II + Syntakt + Outbox 8 + Overhub
Elektron Trinity Bundle: Digitakt II + Digitone II + Syntakt + Outbox 8 + Overhub
Bespaar €316,00
Elektron

Elektron Trinity Bundle: Digitakt II + Digitone II + Syntakt + Outbox 8 + Overhub

  • Studio Bundle
  • Digitakt II + Digitone II + Syntakt
  • Same Elektron sequencer on all three
  • Outbox 8 individual outputs
€3.349,00
€3.349,00 €3.665,00
VAT included • B2B ex VAT
i
Beschikbaar op nabestelling

Laat het me weten zodra beschikbaar

Dit artikel wordt op bestelling geleverd. Laat je e-mail achter en vertel ons wanneer je het nodig hebt — we komen bij je terug met een nauwkeurige leverdatum en laten het weten zodra het wordt verzonden.

Elektron Trinity Bundle: Digitakt II + Digitone II + Syntakt + Outbox 8 + Overhub €3.349,00

Geen spam — we gebruiken dit alleen om op je verzoek te reageren.
Betaal in termijnen Klarna
  • 3 × €1.116,33 Rentevrij · 18+, voorwaarden gelden
Bekijk gespreid betalen
In this bundle 5 products
Bought separately: €3.665,00 You save €316,00
Modellen / Alternatieven
Elektron Trinity Bundle: Digitakt II + Digitone II + Syntakt + Outbox 8 + OverhubElektron Trinity Bundle: Digitakt II + Digitone II + Syntakt + Outbox 8 + Overhub Elektron Digitakt II Ultimate BundleElektron Digitakt II Ultimate Bundle Elektron Digitone II Ultimate BundleElektron Digitone II Ultimate Bundle Elektron Syntakt Ultimate BundleElektron Syntakt Ultimate Bundle Elektron Tonverk Ultimate BundleElektron Tonverk Ultimate Bundle
Gratis verzending
Gratis levering boven €149 of €4 naar een afhaalpunt. Aankomst in 3–5 werkdagen. Meer informatie
Wordt verzonden zodra beschikbaar
Momenteel niet op onze lokale voorraad — bestel het en we versturen het zodra het binnen is. Bekijk het voorraadlabel hierboven voor de meest actuele timing. Meer informatie
Prijsgarantie
Ergens anders goedkoper gevonden? Wij passen de prijs aan. Meer informatie
Ben Advies nodig?Onze experts staan klaar We nemen meestal op via de hotline tussen 10:00 en 18:00 uur (lunch 13:30–14:30). Als we je missen — sorry, we zijn maar mensen. Op eenvoudige vragen reageren we meestal binnen een paar uur.

Elektron Trinity Bundle – The Three-Box Elektron Studio, Wired and Hubbed

Sampler, synth, drums: the Digitakt II, Digitone II and Syntakt are the three Elektron machines that were built to run side by side, sequencing each other over MIDI and sharing one workflow. This bundle delivers all three plus the two pieces that make them a studio rather than a pile – the OH-7 Overhub so all three sit on one USB 3.0 hub, and Outbox 8 so the desk gets individual outputs. It is the complete dawless setup, ordered once.

In This Setup

  • Elektron Digitakt II – 16-track drum machine and sampler with six sample machines and an FM engine.
  • Elektron Digitone II – 16-track, 16-voice polyphonic synth with four engines.
  • Elektron Syntakt – 12-track drum computer: 8 digital, 3 analog, 1 FX track.
  • Elektron Outbox 8 – eight configurable 1/4-inch audio or CV outputs over USB-C.
  • Elektron OH-7 Overhub – 7-port USB 3.0 hub for the whole rig.

Why This Combination

  • Same sequencer language three times: parameter locks, conditional trigs and song mode work identically across all three boxes.
  • Overbridge for all of them: the Overhub keeps three Elektron machines on one host without dropouts.
  • Outputs where they matter: Outbox 8 gives the machine you mix most its own eight jacks; move it between boxes as the track needs.

Set price includes all five products; MIDI and audio cables are sold separately.
Three machines, one clock

Three machines, one clock

Sampler, FM synth and hybrid drum computer, chained over MIDI and sharing one hub.

Three Elektron machines that were designed to sit next to each other: the Digitakt II for samples, the Digitone II for FM and melodic work, and the Syntakt for analogue and digital drums. Each carries the same sequencer language, so patterns, parameter locks and trig conditions transfer between them and one MIDI chain keeps all three in time. The Outbox 8 adds eight assignable outputs and the OH-7 Overhub puts the whole desk on a single host connection.

  • Sampler, FM synth and drum computer in one set
  • MIDI In/Out/Thru with DIN Sync on every machine
  • Eight assignable audio or CV outputs
  • Seven USB 3.0 ports on one host connection
  • Overbridge multitrack from all three
Elektron Digitakt II drum machine and sampler, front view
Elektron Digitakt II drum machine and sampler
The sampler

Elektron Digitakt II

Sixteen audio tracks and 400 MB of sample memory, with six source machines covering one-shots, time-stretching, repitching, slicing and grid playback. In this rig it usually holds the drums and the sampled material, and clocks the other two.

  • Sixteen audio tracks, stereo or mono, each usable as a MIDI track instead
  • 400 MB of sample memory and over 1,000 sample slots per project
  • Six source machines: Oneshot, Werp, Stretch, Repitch, Slice and Grid
  • 128-step sequencer with parameter locks, trig conditions and per-track pattern length
  • Class-compliant USB audio and Overbridge for multitrack recording into a DAW
Specifications
Tracks16 stereo or mono audio tracks, or MIDI tracks
Sample memory400 MB, over 1,000 sample slots per project
Sampling24-bit, 48 kHz A/D and D/A, up to 30 minutes of stereo samples per project
Sequencer128 steps per pattern and track, individual pattern length per track
Source machinesOneshot, Werp, Stretch, Repitch, Slice, Grid
EffectsSaturator Delay, Supervoid Reverb, Panoramic Chorus; master compressor and overdrive
Connections2 x 1/4 in balanced outs, 2 x 1/4 in balanced ins, headphones, MIDI In/Out/Thru with DIN Sync out, USB 2.0
Dimensions / weight215 x 176 x 63 mm / approx. 1.48 kg
View product
Elektron Digitone II FM synthesizer, front view
Elektron Digitone II control panel and knobs
Elektron Digitone II, angled view
The synth

Elektron Digitone II

Sixteen voices across sixteen tracks, with FM Tone, FM Drum, Wavetone and Swarmer machines. It carries the chords, pads and leads, and any spare track can sequence external gear over MIDI.

  • Four synthesis machines: FM Tone, FM Drum, Wavetone and Swarmer
  • 16 voices across 16 tracks, any of which can drive external gear over MIDI instead
  • Six filter machines and three assignable LFOs per voice
  • 128-step sequencer with parameter locks, Euclidean generator and arpeggiator
  • 48 kHz, 24-bit converters with class-compliant USB audio and Overbridge
Specifications
Polyphony16 voices
Tracks16 synth or MIDI tracks
Synthesis machinesFM Tone, FM Drum, Wavetone, Swarmer
FiltersSix filter machines plus one digital base-width filter per voice
Sequencer128 steps per pattern and track, Euclidean generator, arpeggiator
EffectsSaturator Delay, Supervoid Reverb, Panoramic Chorus; master overdrive and stereo compressor
Connections2 x 1/4 in balanced outs, 2 x 1/4 in balanced ins, headphones, MIDI In/Out/Thru with DIN Sync out, USB 2.0
Dimensions / weight215 x 176 x 63 mm / approx. 1.48 kg, VESA 100 x 100
View product
Hands playing an Elektron Syntakt on a workbench
Elektron Syntakt drum computer and synthesizer, angled view
Elektron Syntakt, top view of the control panel
Elektron Syntakt rear panel connections
The drum computer

Elektron Syntakt

Eight digital tracks plus three analogue drum voices and an analogue cymbal voice, with a dedicated FX track. It brings the analogue kicks and hats that the other two machines cannot make.

  • Twelve tracks, eight digital and four analogue, plus a dedicated FX track
  • Analogue drum and cymbal voices alongside digital tonal and percussion machines
  • 64-step sequencer with parameter locks, trig conditions and micro timing
  • Analogue overdrive with delay and reverb sends
  • Class-compliant USB audio and Overbridge for multitrack into a DAW
Specifications
Tracks12 tracks: 8 digital, 3 analogue drum, 1 analogue cymbal, plus a dedicated FX track
Digital machines11 selectable machines, including tonal synths and a sample player
Analogue machines19 drum machines and 13 cymbal machines
Sequencer64 steps per pattern and track, individual pattern length per track
Modulation2 assignable LFOs per track, multimode filter per voice
EffectsDelay and reverb sends, analogue overdrive, dedicated FX track
Connections2 x 1/4 in impedance-balanced outs, 2 x 1/4 in ins, headphones, MIDI In/Out/Thru with DIN Sync out, USB 2.0
Dimensions / weight215 x 176 x 63 mm / approx. 1.53 kg
View product
Elektron Outbox 8 patched on a desk beside a Digitakt II and pedals
Elektron Outbox 8 connected to an Elektron Digitone II showing the output configuration screen
Elektron Outbox 8, top view with numbered output labels
The outputs

Elektron Outbox 8

Eight configurable 1/4 inch jacks over one USB-C connection. Connected to whichever machine needs its tracks separated, it sends audio to the desk, control voltage to a modular case, or a mix of the two.

  • Eight 1/4 inch impedance-balanced, DC-coupled jacks, each assignable to audio or CV
  • 48 kHz, 32-bit D/A converters
  • CV range of plus/minus 5 V with pitch V/Oct, pitch Hz/V, linear value, trig, gate and clock
  • Class-compliant over USB-C, so a computer, tablet or phone sees an eight-output interface with no drivers
  • 176 x 90 x 28 mm and 0.35 kg, bus-powered from USB-C
Specifications
Outputs8 x 1/4 inch impedance-balanced, DC-coupled audio/CV
Converters48 kHz, 32-bit D/A
CV rangeplus/minus 5 V
CV signal typesPitch V/Oct, Pitch Hz/V, Linear Value, Trig, Gate, Clock
Data port1 x USB 2.0 High-Speed Type-C
PowerUSB Type-C, 5 V / 0.5 A / 2.5 W or higher
Dimensions176 x 90 x 28 mm including feet
WeightApprox. 0.35 kg
View product
Elektron OH-7 Overhub seven-port USB hub
Elektron OH-7 Overhub, port detail
The hub

Elektron OH-7 Overhub

One host connection, seven ports. The Overhub keeps the machines, the Outbox 8 and a controller on a single stable connection to the computer, which is what Overbridge needs.

  • Seven USB 3.0 SuperSpeed ports from one host connection
  • Data rate up to 5 Gbit/s, backwards compatible with earlier USB devices
  • Class-compliant with macOS, Windows and Linux, no driver install
  • Angled housing keeps cables accessible on a crowded desk
  • Built for Overbridge-enabled machines
Specifications
Ports7 x USB 3.0 SuperSpeed
Data rateUp to 5 Gbit/s
CompatibilityClass-compliant: macOS, Windows, Linux
HousingCompact, stackable, angled for cable access
Dimensions10.5 x 6.5 x 2.8 cm
Weight200 g
View product

Key technologies

  • Overbridge
  • Class-compliant USB audio
  • Parameter locks
  • Trig conditions
  • Micro timing
  • DC-coupled outputs
  • Supervoid Reverb
  • Saturator Delay
  • Panoramic Chorus
  • FM Tone
  • FM Drum
  • Wavetone
  • Swarmer
  • Analogue overdrive
  • Song mode
  • Euclidean generator

Setting it up

  1. Chain the machines over MIDI: Digitakt II MIDI Out to Digitone II MIDI In, then Digitone II MIDI Thru to Syntakt MIDI In.
  2. Set the Digitakt II as the clock master and the other two to receive transport and clock.
  3. Connect all three machines to the OH-7 Overhub, and the hub to the computer, so Overbridge sees each one on a stable port.
  4. Connect the Outbox 8 to whichever machine needs separate outputs and assign its eight jacks in-device.
  5. Run the main outputs of the machines that are not on the Outbox 8 straight to the desk or interface.

Questions

Can one Outbox 8 serve all three machines at once?

No. It has a single USB data port, so it connects to one host at a time and its eight outputs come from that machine. Move it to whichever machine needs separate outs, or add a second unit.

Do the three machines stay in sync over MIDI?

Yes. Each has MIDI In, Out and Thru with DIN Sync out, so a chain from one clock master keeps all three locked, with no computer involved.

Do patterns transfer between them?

No, projects are machine-specific. What transfers is the workflow: the same parameter locks, trig conditions, micro timing and pattern length rules apply on all three.

Which one should clock the others?

Any of them can be clock master. Most people use the machine holding the drums, which in this set is usually the Digitakt II or the Syntakt.

Can I record all three into a DAW at once?

Yes. All three are Overbridge enabled and class compliant, so with the Overhub connecting them to one computer each machine streams its tracks separately.

Why a powered hub instead of the ports on a laptop?

Three Overbridge machines plus the Outbox 8 is four stable connections. The OH-7 turns one host port into seven USB 3.0 ports at up to 5 Gbit/s.

Is a case included?

No. This set is the three machines, the Outbox 8 and the Overhub. The Analog Cases Pulse Case fits any one of the three and is sold separately.

Vergelijken
Beoordelingen
Misschien vind je dit ook leuk